Engineering

Volume of a Hollow Cylinder, Pipe or Tube

The volume of a hollow cylinder is V = π(R² − r²)h. Use radii, diameters or wall thickness, with PVC pipe, washer and steel pipe weight examples.

By Volume to Cylinder Team •
Hollow cylinder pipe with outer radius R, inner radius r and wall thickness t labelled

The volume of a hollow cylinder is V = π(R² − r²)h, where R is the outer radius, r is the inner radius, and h is the height or length. A hollow cylinder is a cylinder with a smaller, centred cylinder removed from its middle. Pipes, tubes, rings, sleeves, and bushings are all hollow cylinders.

The formula gives the volume of material in the wall, not the space inside. The hollow cylinder calculator runs this formula.

What Is the Formula for the Volume of a Hollow Cylinder?

The formula for the volume of a hollow cylinder is V = π(R² − r²)h.

The formula has 3 inputs:

  • R (outer radius) is half the outside diameter (OD).
  • r (inner radius) is half the inside diameter (ID), the radius of the hole.
  • h (height) is the length of the pipe or the thickness of the ring.

R must be bigger than r. R² − r² is the area of the ring-shaped cross-section, which mathematicians call an annulus.

Hollow cylinder with the outer radius R, inner radius r, wall thickness t and length h labelled

Why Does the Hollow Cylinder Formula Work?

The hollow cylinder formula works since the volume of the wall equals the volume of the outer cylinder minus the volume of the inner “hole” cylinder.

  1. The outer cylinder has volume πR²h.
  2. The hole is a cylinder with volume πr²h.
  3. Subtracting gives πR²h − πr²h.
  4. Factoring out πh gives π(R² − r²)h.

Do not subtract the radii before squaring. π(R − r)²h is a different, smaller number, and it is wrong for a hollow cylinder.

How Do You Find Hollow Cylinder Volume Using Diameters?

To find hollow cylinder volume from diameters, use V = π(D² − d²)h ÷ 4, where D is the outside diameter and d is the inside diameter. Pipe catalogues list OD and ID, so this version saves 2 halving steps.

Example: a tube with D = 50 mm, d = 40 mm, and h = 1,000 mm.

  • V = π × (50² − 40²) × 1,000 ÷ 4
  • V = π × (2,500 − 1,600) × 1,000 ÷ 4
  • V = π × 900 × 250 ≈ 706,858 mm³ ≈ 706.9 cm³

How Do You Find the Inner Radius from Wall Thickness?

To find the inner radius from wall thickness, subtract the wall thickness from the outer radius: r = R − t. Pipe specifications often give the outside diameter and the wall thickness (t) without the inside diameter.

In diameter terms, the inside diameter is d = D − 2t, since the wall appears on both sides of the hole.

Example: a pipe with an OD of 110 mm and a wall thickness of 5.3 mm.

  • R = 110 ÷ 2 = 55 mm.
  • r = 55 − 5.3 = 49.7 mm.
  • d = 110 − 2 × 5.3 = 99.4 mm.

Example 1: Material Volume of a PVC Pipe

A polyvinyl chloride (PVC) pipe with an OD of 110 mm, a wall thickness of 5.3 mm, and a length of 6 m contains about 10,460 cm³ (10.46 L) of PVC.

  1. Convert the length to millimetres. h = 6 m = 6,000 mm.
  2. Find the radii. R = 55 mm, r = 55 − 5.3 = 49.7 mm.
  3. Square both radii. R² = 3,025 mm², r² = 2,470.09 mm².
  4. Subtract. R² − r² = 554.91 mm².
  5. Multiply by π. π × 554.91 ≈ 1,743.3 mm². This is the wall’s cross-sectional area.
  6. Multiply by the length. 1,743.3 × 6,000 ≈ 10,459,807 mm³.
  7. Convert to cm³. 10,459,807 ÷ 1,000 ≈ 10,459.8 cm³.

PVC has a density of about 1.4 g/cm³, so the pipe weighs 10,459.8 × 1.4 ≈ 14,644 g, or 14.6 kg (32.3 lb).

Example 2: Volume of a Metal Ring or Washer

A washer is a very short hollow cylinder, where h is the washer’s thickness. A steel washer with an OD of 30 mm, an ID of 13 mm, and a thickness of 2.5 mm has a volume of about 1,435 mm³ (1.44 cm³).

Steel washer with outside diameter 30 mm, inside diameter 13 mm and thickness 2.5 mm

  1. Find the radii. R = 30 ÷ 2 = 15 mm, r = 13 ÷ 2 = 6.5 mm.
  2. Subtract the squares. 15² − 6.5² = 225 − 42.25 = 182.75 mm².
  3. Multiply by π. π × 182.75 ≈ 574.1 mm².
  4. Multiply by the thickness. 574.1 × 2.5 ≈ 1,435.3 mm³.

Steel has a density of 7.85 g/cm³, so the washer weighs 1.4353 × 7.85 ≈ 11.3 g. A box of 100 washers weighs about 1.13 kg.

What Is the Difference Between Material Volume and Capacity?

Material volume is the space taken by the pipe wall, and capacity is the space inside the pipe that holds liquid. The two numbers answer different questions:

End views of a PVC pipe comparing the ring of material with the water-filled bore

MeasureFormulaAnswers the questionPVC pipe example (6 m)
Material volumeπ(R² − r²)hHow much PVC or steel is in the pipe?10.46 L of PVC
Capacity (bore volume)πr²hHow much water does the pipe hold?46.56 L of water
Total outer volumeπR²hHow much space does the pipe take up, hole included?57.02 L

Material volume + capacity = total outer volume: 10.46 + 46.56 = 57.02 L. Use capacity to size a pipe for flow or to work out how much water drains from a line. Use material volume to find weight, cost, or recycling value.

How Do You Find the Weight of a Steel Pipe?

To find the weight of a steel pipe, multiply the material volume by the density of steel, 7.85 g/cm³ (7,850 kg/m³).

Example. A 2-inch Schedule 40 steel pipe has an OD of 60.3 mm and a wall thickness of 3.91 mm. Find the weight of a 6 m length.

  1. Radii: R = 60.3 ÷ 2 = 30.15 mm. r = 30.15 − 3.91 = 26.24 mm.
  2. Ring area: π × (30.15² − 26.24²) = π × (909.02 − 688.54) = π × 220.48 ≈ 692.7 mm².
  3. Material volume: 692.7 × 6,000 ≈ 4,156,000 mm³ = 4,156 cm³.
  4. Weight: 4,156 × 7.85 ≈ 32,620 g = 32.6 kg (71.9 lb).

This gives 5.44 kg per metre, which matches the published weight for 2-inch Schedule 40 pipe. The same 6 m pipe holds π × 26.24² × 6,000 ≈ 12.98 L of water when full. The volume to weight calculator covers other metals.

There are 4 common pipe material densities:

  • Steel: 7.85 g/cm³.
  • Copper: 8.96 g/cm³.
  • Aluminium: 2.70 g/cm³.
  • PVC: about 1.4 g/cm³.

What Is the Unrolled-Sheet Shortcut for Pipe Volume?

A pipe wall holds the same volume as a flat sheet: mean circumference × wall thickness × length. The formula is V = 2π × rm × t × h, where rm is the mean radius, (R + r) ÷ 2, and t is the wall thickness.

Picture cutting the pipe along its length and pressing it flat. You get a rectangle. Its width is the circumference measured at the middle of the wall, and its thickness is t.

The shortcut is exact, not an estimate. R² − r² factors into (R − r)(R + r), which equals t × 2rm.

Check it on the PVC pipe from Example 1:

  • rm = (55 + 49.7) ÷ 2 = 52.35 mm.
  • Ring area = 2π × 52.35 × 5.3 ≈ 1,743.3 mm².

That matches the π(R² − r²) answer to the decimal. Use the shortcut when a spec sheet gives the mean diameter and wall thickness, which is common for tube, rolled steel, and boiler shells.

Example 3: Concrete in a Manhole Ring

A precast concrete manhole ring with an inside diameter of 1.2 m, an outside diameter of 1.4 m, and a height of 1 m contains about 0.408 m³ of concrete and weighs about 980 kg.

  1. Find the radii. R = 1.4 ÷ 2 = 0.7 m. r = 1.2 ÷ 2 = 0.6 m.
  2. Subtract the squares. 0.7² − 0.6² = 0.49 − 0.36 = 0.13 m².
  3. Multiply by π. π × 0.13 ≈ 0.4084 m².
  4. Multiply by the height. 0.4084 × 1 = 0.4084 m³.
  5. Find the weight. Concrete weighs about 2,400 kg/m³, so 0.4084 × 2,400 ≈ 980 kg.

That weight sets the size of the crane or digger arm you need to lift it into place. A stack of 3 rings for a 3 m deep chamber needs about 1.23 m³ of concrete and weighs close to 3 tonnes.

How Does Wall Thickness Change Weight and Capacity?

A thicker wall adds material on the outside or takes capacity from the inside. Which one depends on how the pipe is sized.

Plastic and steel pipe keep a fixed outside diameter for each size, so fittings match. A heavier wall grows inward:

110 mm PVC pipe, 6 m longWall 3.2 mmWall 5.3 mm
Inside diameter103.6 mm99.4 mm
PVC volume6.44 L10.46 L
Weight at 1.4 g/cm³9.0 kg14.6 kg
Water capacity50.58 L46.56 L

The thicker wall adds 62% more plastic, and costs about that much more, but holds 8% less water. It takes higher pressure, which is why water mains use it.

Frequently Asked Questions

Is the volume of a pipe the water it holds?

No, the volume of a pipe usually means the volume of the pipe material, π(R² − r²)h. The water a pipe holds is its capacity, πr²h, which uses only the inner radius.

What is the formula for a hollow cylinder with diameters?

The formula is V = π(D² − d²)h ÷ 4, where D is the outside diameter and d is the inside diameter.

Can the inner radius be bigger than the outer radius?

No, the inner radius must be smaller than the outer radius. A negative answer means R and r are swapped.

What is the surface area of a hollow cylinder?

The total surface area of a hollow cylinder is 2πRh + 2πrh + 2π(R² − r²): the outer wall, the inner wall, and the two ring-shaped ends.

How do I find the volume of a cylinder without top and bottom?

A cylinder without top and bottom is an open tube. Its material volume uses the hollow cylinder formula. The without top and bottom calculator covers the surface area of that shape.

What is the mean radius of a pipe?

The mean radius is the radius measured to the middle of the wall: (R + r) ÷ 2. The wall’s cross-section area equals 2π × mean radius × wall thickness.

Does a thicker pipe wall hold less water?

Yes, for pipe sold by outside diameter. The extra wall grows inward, so the bore gets smaller. A 110 mm PVC pipe holds 8% less water with a 5.3 mm wall than with a 3.2 mm wall.